RM新时代官方-首页

　　Occasionally, there will be a lot of soil residue is not clear and clean in the automatic feeding mixer, so there will be a lot of accidents in the process of operation. I'd like to tell you that five methods can easily clean up the residue of the automatic feeding mixer. Go and have a look!

　　應準備好緊急驅動軟管，將機械熄火，卸下液壓馬達上的高壓油管接頭。

　　First, prepare the emergency drive hose, turn off the machine, and remove the high-pressure oil pipe joint on the hydraulic motor.

　　將救援車熄火，將液壓馬達的高壓油管拆卸，并與故障車上的相應接頭利用緊急驅動軟管相連接。

　　Shut down the rescue vehicle, dismantle the high-pressure oil pipe of the hydraulic motor, and connect it with the corresponding connector on the fault vehicle by using the emergency drive hose.

　　發動救援車并將操作手柄撥動出料位置，故障車中的混合便會(huì )被排出。

　　Start the rescue vehicle and move the operating handle to the discharging position, and the mixture in the fault vehicle will be discharged.
           

　　當緊急驅動完成后，將自動上料攪拌車中的驅動軟管拆卸，并回復原狀。

　　When the emergency drive is completed, remove the drive hose in the automatic feeding mixer and return to the original state.

　　在拖輪、滾道間放入木楔，并控制攪拌筒的旋轉，將發動機熄火，將液壓馬達的一根高壓油管拆卸，攪拌筒可自由旋轉并控制攪拌筒的旋轉。從而讓維修孔轉到下部位置，然后將維修孔打開，并清理出筒中的混凝土，當混凝土排出完成后，恢復自動上料攪拌車的原來狀態即可。

　　Put a wooden wedge between the tugboat and the raceway, control the rotation of the mixing drum, turn off the engine, and dismantle a high-pressure oil pipe of the hydraulic motor. The mixing drum can rotate freely and control the rotation of the mixing drum. So that the maintenance hole is turned to the lower position, and then the maintenance hole is opened, and the concrete in the cylinder is cleaned out. When the concrete is discharged, the original state of the automatic feeding mixer can be restored.

　　以上5種方式均可將殘留其中的土渣干凈，不管您會(huì )現在哪種方法都要注意問題。

　　The above five methods can remove the residual soil residue, no matter which method you will now, you should pay attention to safety issues.