自動攪拌車如何檢查磨損情況?
概述:,針對混凝土自動攪拌車的具體磨損情況,我們應觀察機油顏色、品質方面是否出現問題,觀察外表是否存在鐵屑,檢查機油粘性。若機油中存
,針對混凝土自動攪拌車的具體磨損情況,我們應觀察機油顏色、品質方面是否出現問題,觀察外表是否存在鐵屑,檢查機油粘性。若機油中存在很多鐵屑,則說明曲軸瓦、連桿瓦位置出現嚴重磨損情況。若機油呈現粘稠狀態,說明機油已經有很長時間卻未經過更換。
First of all, according to the specific wear of the concrete mixer, we should observe whether there are problems in the color and quality of the oil, observe whether there are iron chips on the surface, and check the oil viscosity. If there are a lot of iron chips in the engine oil, it means that the crankshaft bearing bush and connecting rod bush are seriously worn. If the oil is viscous, it means that the oil has not been replaced for a long time.
在拆開連桿活塞的曲軸時,觀察連桿瓦、曲軸瓦具體狀況,整機均不可使用。若磨損情況不嚴重,可讓其經過磨軸加工后,混凝土攪拌車方可使用。
When the crankshaft of connecting rod piston is disassembled, observe the specific conditions of connecting rod bush and crankshaft bush. The whole machine can not be used. If the abrasion is not serious, the concrete mixer can be used after grinding the shaft.
觀察氣缸套的具體磨損情況,在拆開缸套時,禁止打到發動機機體,避免出現嚴重損壞情況。
Observe the specific wear of the cylinder liner. When the cylinder liner is disassembled, do not hit the engine block to avoid serious damage.
對于混凝土自動攪拌車來說,在整個維修期間,每個動作都應謹慎小心,任何一個細節的錯誤都會(huì )致使發動機不能達到正常工作狀態,因此在對混凝土攪拌車維修時,應請專門的技術人員進行,避免出現更大失誤。
For the automatic concrete mixer, during the whole maintenance period, every action should be cautious and careful, any detail error will cause the engine can not reach the normal working state, so in the maintenance of the concrete mixer, special technicians should be asked to avoid greater mistakes.
The above is about the automatic mixer how to check the wear of the content, hope to help you, if you want to know more content, welcome to click consultation http://m.jackpetty.net Official website.