RM新时代官方-首页

自動攪拌車的內飾檢查怎么做？應該檢查所有飾面是否含有破損的地方，如中空臺、座椅、車頂、車地面等。下面小編來為您詳細解說下。

How to check the interior of the automatic mixer? All finishes should be checked for damage, such as hollow platform, seats, roof, vehicle floor, etc. The following editor will give you a detailed explanation.

檢查座椅、臥鋪

Check seat and sleeper

新的自動攪拌車的座椅，臥鋪和其它的內飾件都應該是有塑料套的，檢查車輛的塑料套是否完整，坐在座椅上感覺座椅內部是否有異物，如果可以多方調節的座椅，應該進行測試，調試過程中有無異響是否平順，頭枕也不能放過。

The seats, berths and other interior trim parts of the new automatic mixer should have plastic covers. Check whether the plastic covers of the vehicle are complete. Sit on the seat and feel whether there are foreign objects inside the seat. If the seat can be adjusted in many ways, it should be tested. During the commissioning process, check whether there is any abnormal sound and whether it is smooth. The headrest can not be let go.

而臥鋪則需要躺一下，感覺內部有無異物，上下鋪都一樣。在檢查上臥鋪折疊是否平順，檢查是否松動。

The sleeper needs to lie down and feel whether there is any foreign matter inside. The upper and lower berths are the same. Check whether the upper berth is folded smoothly and whether it is loose.

儀表臺

Instrument panel

檢查自動攪拌車儀表臺是否整潔，有無劃痕；在不插鑰匙的情況下，檢查各種按鈕，看看按鈕是不是都可靠，有沒有按一下就掉下來的“脆弱”情況。再將點火開關放在打開狀態，檢查組合儀表的各項指示燈是否正常工作。

Check whether the instrument panel of the automatic mixer is clean and free of scratches; Without inserting the key, check all kinds of buttons to see if they are reliable and whether there is a "fragile" situation where they fall down after one click. Then put the ignition switch on and check whether the indicators of the combination instrument work normally.

在看看別的電子操作按鈕能不能正常工作，例如：手動或電動玻璃升降器，空調調整鈕，點煙器等等，一個都別落下。

When checking whether other electronic operation buttons can work normally, such as: manual or electric window regulator, air conditioning adjustment button, cigarette lighter, etc., don't drop any.

帶

Safety belt

帶是保證駕駛人員生命的重要部分，所以一定要嚴格檢查，拉開、自動回收、鎖止的可靠性，應該平穩順暢。模擬并檢查帶在發生作用時的可靠性。

The safety belt is an important part to ensure the driver's life safety, so it must be strictly checked. The reliability of opening, automatic recovery and locking should be smooth. Simulate and check the reliability of the safety belt when it works.

燈光

lighting

甭管什么近光燈、遠光燈、轉向燈、剎車燈……只要車上能亮的都仔細檢查一遍，燈光應該明亮、穩定。別是大燈只亮一邊的“獨眼”，或是轉向燈不閃。

No matter what low beam lights, high beam lights, turn signals, brake lights... As long as the lights on the car can be checked carefully, the lights should be bright and stable. Don't use the "one eye" with only one side of the headlight on, or the turn signal does not flash.

雨刮系統

Wiper system

檢查雨刮器噴水系統、刮水系統是否正常，別一盆水泊上來雨刮器刮的還沒蒸發的快呢。雨刮器在刮水應沒有“吱嘎……吱嘎……”的聲音，如果有說明雨刮片已經老化。

Check whether the water spray system and wiper system of the wiper are normal. Don't let a basin of water come up. The wiper has not evaporated fast. There should be no sound of "creak... Creak..." when the wiper is wiping. If there is, it means that the wiper blade is aging.

自動攪拌車的內飾檢查怎么做？我們從幾個方面來進行了問題的講解，您有疑惑可以隨時來我們網站http://m.jackpetty.net咨詢了解！

How to check the interior of the automatic mixer? We have explained the problem from several aspects. If you have any doubts, you can come to our website at any time http://m.jackpetty.net Consult and understand!