RM新时代官方-首页

自動上料攪拌車在行駛的過程中隨時會(huì )改變速度，在行駛過程中變速箱主要是能夠起到改變速度的作用，在平時使用當中做好保養很關鍵，下面廠家為您講講自動上料攪拌車變速箱與驅動裝置的維護事項。

The speed of the automatic feeding mixer will change at any time during the driving process. The gearbox can mainly change the speed during the driving process. It is critical to do a good job of maintenance during normal use. The following manufacturer will tell you about the maintenance of the gearbox and drive device of the automatic feeding mixer.

正確把握自動上料攪拌車變速箱油的使用周期，定期更換/經常檢查自動上料攪拌車變速器油位是否正常/正確更換變速箱油/不要刪除自動上料攪拌車變速箱

Correctly grasp the service cycle of the gearbox oil of the automatic feeding mixer, and regularly replace/frequently check whether the gearbox oil level of the automatic feeding mixer is normal/correctly replace the gearbox oil/do not delete the gearbox of the automatic feeding mixer

以上內容主要講了保養自動上料攪拌車變速箱的方法，變速箱對于改變控制車速有著重要作用，做好對變速箱的保養工作之后，才能對車的平穩駕駛起到良好的作用。

The above contents mainly talk about the method of maintaining the gearbox of the automatic feeding mixer. The gearbox plays an important role in changing the speed control. Only after the maintenance of the gearbox is done well can it play a good role in the smooth driving of the vehicle.

驅動裝置是整個小型自動上料攪拌車中很重要的一部分，如果這部分發生故障，必然會(huì )影響設備的正常工作，會(huì )導致車報廢。

The drive device is a very important part of the whole small automatic feeding mixer truck. If this part fails, it will inevitably affect the normal operation of the equipment and cause the truck to be scrapped.

因此，驅動裝置是否可靠，是需要用戶高度重視的問題。為保證驅動裝置完好可靠，應做好以下維護工作：

Therefore, whether the driving device is reliable or not is a problem that requires users to attach great importance to. In order to ensure that the driving device is intact and reliable, the following maintenance work shall be done well:

萬向轉動部分是故障多發部位，應按時加注潤滑脂，并經常檢查磨損情況，及時修理更換；保證液壓油清潔；保證液壓油冷卻裝置有效

The universal rotating part is the part with frequent faults, which shall be filled with lubricating grease on time, and the wear condition shall be checked frequently, and the parts shall be repaired and replaced in time; Ensure that the hydraulic oil is clean; Ensure the effectiveness of the hydraulic oil cooling device

自動上料攪拌車在運輸過程中，攪拌筒一直在轉動，驅動裝置關系到攪拌車的正常使用，因此我們一定要對驅動裝置做好維護工作，才能防止在使用過程中出現損壞。

During the transportation of the automatic feeding mixer, the mixing cylinder is rotating all the time, and the drive device is related to the normal use of the mixer. Therefore, we must maintain the drive device to prevent damage during use.

自動上料攪拌車變速箱與驅動裝置的維護事項我們就講解到這里了，您對此有什么想法或者問題可以隨時來我們網站http://m.jackpetty.net咨詢！

This is the end of the maintenance of the gearbox and drive of the automatic feeding mixer. If you have any ideas or questions, please come to our website at any time http://m.jackpetty.net consulting service