概述：攪拌一體車在平時的使用一定要做好保養，這樣才會(huì )使其的工作效率有更好地提高。下面我們就來看看。Mixing machine in the usual use
攪拌一體車在平時的使用一定要做好保養，這樣才會(huì )使其的工作效率有更好地提高。下面我們就來看看。
Mixing machine in the usual use must do a good job in maintenance, so that its work efficiency can be better improved. Let's take a look.
1、機油在柴油機的使用中是必不可少的一部分，主要是潤滑，冷卻，清潔等，因此，很多的小型混凝土攪拌車駕駛員都會(huì )注意潤滑油的油量，并按照標準添加，但是確忽略了潤滑液的質量和檢查。
1. Engine oil is an essential part in the use of diesel engine, mainly for lubrication, cooling, cleaning, etc. Therefore, many small concrete mixer drivers will pay attention to the amount of lubricating oil and add it according to the standard, but the quality and inspection of lubricating fluid are ignored.
已經變質的機油應該要及時的更換，而導致一些發動機的運動件總是在較差的潤滑環境下運轉，加速了機件的磨損，一般在正常的情況下機油的耗損并不是很大，但是確很容易產生污染，失去了保護柴油機的作用，在柴油機運轉的時候許多污物會(huì )進入到柴油里邊，如果只加不換的話就會(huì )引起燒瓦，抱軸等危險的事故發生。
The deteriorated engine oil should be replaced in time. As a result, some moving parts of the engine always operate in poor lubrication environment, which accelerates the wear of the engine parts. Under normal conditions, the oil consumption is not very large, but it is easy to cause pollution and lose the function of protecting the diesel engine. When the diesel engine is running, a lot of dirt will enter the diesel oil, If it is not replaced, it will cause tile burning, shaft holding and other dangerous accidents.
2、在換裝氣缸套件還有活塞的時候認為新的氣缸套和活塞都是標準件，具有互換性裝上去就能使用，而實際上氣缸套還有活塞都是有一定的差距的，如果尺寸不一樣安裝上就會(huì )很難啟動。另外各個缸用同一個分組缸套和活塞的時候應該要注意，為了保證標準，在裝機之前應該進行檢驗，防止裝上假的劣質的殘次品。
2. When replacing the cylinder set and piston, it is considered that the new cylinder liner and piston are standard parts, which are interchangeable and can be used when installed. However, there is a certain gap between the cylinder liner and the piston. If the size is different, it will be difficult to start the installation. In addition, attention should be paid when using the same cylinder liner and piston for each cylinder. In order to ensure the standard, inspection should be carried out before installation to prevent the installation of fake and inferior defective products.
The above is about the maintenance of the engine oil of the mixer. I hope it will help you. If you want to know more about it, please click the official website: http://m.jackpetty.net 。
點擊撥打服務熱線：4008791999
