概述：像一些泥土之類的，需要自動攪拌車邊攪拌邊運輸，泥土含有一定的水分，一旦水分少了它就會變干，因此需要在運輸過程中慢慢攪拌，氣路系統作
像一些泥土之類的，需要自動攪拌車邊攪拌邊運輸，泥土含有一定的水分，一旦水分少了它就會變干，因此需要在運輸過程中慢慢攪拌，氣路系統作為攪拌車常用的一種部件，攪拌車的氣路系統的保養應該怎么做？下面
自動攪拌車廠家來給大家介紹一下。
For example, some soil needs to be transported by the automatic mixer while mixing. The soil contains a certain amount of moisture. Once the moisture is less, it will dry. Therefore, it needs to be stirred slowly in the transportation process. As a common part of the mixer, how should the maintenance of the air system of the mixer be done? Let's introduce the automatic mixer to you.
1、自動上料攪拌車空氣壓縮機應水平放置、固定，通風良好。
1. The air compressor of automatic feeding mixer should be placed horizontally and fixed with good ventilation.
2、不能經受風吹雨淋，也不能暴曬在陽光下。
2. Can not withstand the wind and rain, also can not be exposed to the sun.
3、調整好空氣壓力自動開關的上下限值，壓力過低會導致氣缸動作遲緩，壓力過高對氣路系統密封件不利。
3. Adjust the upper and lower limits of the automatic air pressure switch. If the pressure is too low, the cylinder will move slowly. If the pressure is too high, it will be harmful to the seal of the air system.
4、檢查自動上料攪拌車潤滑油的油位，保持油面在油尺上下線之間，油面接近下線時，添加新油。
4. Check the lubricating oil level of the automatic feeding mixer, keep the oil level between the upper and lower lines of the dipstick, and add new oil when the oil level is close to the line.
5、檢查傳送帶張力是否合適，當用手指壓皮帶，皮帶下陷10mm左右為宜；更換傳送帶時應整組更換，以保持張緊度一致。
5. Check whether the tension of the conveyor belt is appropriate. When pressing the belt with fingers, the belt should sink about 10 mm; when replacing the conveyor belt, the whole group should be replaced to maintain the same tension.
氣路系統對于自動上料攪拌車來說也是一處重要的部件，需要添加充足的油，并且保持油量充足，足夠攪拌車的運行，在提高攪拌車的使用效率的同時，也能加強對氣路系統的保養。
The air system is also an important part for the automatic feeding mixer. It needs to add enough oil and keep enough oil for the operation of the mixer. It can not only improve the efficiency of the mixer, but also strengthen the maintenance of the gas system.
The above is what the manufacturer of automatic mixer should do to maintain the air system of the mixer. I believe you all know something about it. If you want to know more about it, please click our website: http://m.jackpetty.net 。
點擊撥打服務熱線：4008791999
