RM新时代官方-首页

After a long time of use, cement concrete mixer may present a series of problems, such as excessive noise, poor braking system, brake system fault, the initiator can not operate normally and so on. Technical personnel should analyze them according to different conditions. Excessive noise may be a problem encountered by every driver, so how to deal with it? Cement concrete mixer manufacturers to deal with excessive noise concrete mixer solution:

一、攪拌筒進料口或出料口進入異物：檢查并清理異物（平常用后也要留意清潔整理）

1、 Foreign matters entering the feeding or discharging port of the mixing drum: check and clean the foreign matters (pay attention to cleaning after use)
       

二、攪拌車齒輪間隙過大或齒斷裂：及時改換受損零件，調整間隙；

2、 Mixer gear clearance is too large or tooth fracture: timely change the damaged parts, adjust the clearance;

三、軸承彎曲或斷裂：沒方法，只要換掉了；

3、 Bearing bending or fracture: no way, as long as replaced;

四、水泥攪拌車?yán)鋮s水溫過低：看看節溫器，問題太大要改換；

4、 Cement mixer cooling water temperature is too low: look at the thermostat, the problem is too big to change;

五、氣門漏氣或調整不當：能夠拆開氣門，停止恰當調整，記住擰緊氣門；

5、 Valve leakage or improper adjustment: be able to disassemble the valve, stop proper adjustment, and remember to tighten the valve;