概述:在酷熱的夏天,自上料攪拌車的內部噪音和溫度會增加。夏日溫度不高,但這可能是因?yàn)榘l(fā)動機或汽車中機油的溫度所造成的。
In the hot sum
在酷熱的夏天,自上料攪拌車的內部噪音和溫度會增加。夏日溫度不高,但這可能是因?yàn)榘l(fā)動機或汽車中機油的溫度所造成的。
In the hot summer, the internal noise and temperature of the self loading mixer will increase. The temperature is not high in summer, but this may be caused by the temperature of oil in the engine or car.
1.洗車水箱中的水量不足以。向洗車水箱注滿水。
1. The amount of water in the car washing water tank is not enough to remove. Fill the car wash water tank with water.
2.假如吸管的進氣口阻塞或阻塞,能夠查看并擰緊吸管。不要呼吸空氣。
2. If the air inlet of the straw is blocked or blocked, check and tighten the straw. Don't breathe air.
3.油箱液位過低,并且油液中的空氣被吸入泵中。假如發生這種狀況,您能夠添加帶有相同標簽的液壓油。
3. The liquid level in the oil tank is too low, and the air in the oil is sucked into the pump. If this happens, you can add hydraulic oil with the same label.
4.假如泵的安裝支架不行結實,則在作業期間會發生振動和噪音。在這種狀況下,能夠加固油泵支架。
4. If the mounting bracket of the pump is not firm, vibration and noise will occur during operation. In this case, the oil pump support can be reinforced.
5.阻塞的濾芯會使吸油困難或不充分。在這種狀況下,請清潔濾芯或替換濾芯。
5. Blocked filter element will make oil absorption difficult or insufficient. In this case, please clean the filter element or replace the filter element.
6.油冷卻電扇未翻開。卸下:翻開冷卻電扇。
6. The oil cooling fan is not turned on. Remove: turn on the cooling fan.
7.假如液壓油不符合要求或油太粘,請?zhí)鎿Q符合標簽要求的低粘度液壓油。
7. If the hydraulic oil does not meet the requirements or the oil is too viscous, please replace the low viscosity hydraulic oil that meets the label requirements.
8.儲罐中有堅固的混凝土。假如發生這種狀況,請及時整理并鏟起。
8. There is solid concrete in the tank. If this happens, please tidy it up and shovel it up in time.
9.輸入萬向節軸之間的銜接視點以及萬向節軸與取力器之間的銜接視點太大,假如松開會發生噪音,在這種狀況下,請?jiān)跁r(shí)間內查看并擰緊。
9. The connection point between the input universal joint shaft and the connection point between the universal joint shaft and the power take-off is too large. If it is loosened, there will be noise. In this case, please check and tighten it within a time.
Integrated mixer http://m.jackpetty.net Focus on providing customers with satisfactory service. For more wonderful content, please click to enter our website, and we will have more wonderful content for you to check Automatic mixer