RM新时代官方-首页

進出料裝置由進料斗、出料斗、主卸料槽、副卸料槽、支架、鎖緊架等組成，是攪拌車的重要組成部分，直接影響到進出料的速度和質量。那么自動上料攪拌車進出料裝置怎么工作的呢？

The feeding and discharging device is composed of feeding hopper, discharging hopper, main discharge chute, auxiliary discharge chute, support, locking frame, etc. it is an important part of the mixer, which directly affects the speed and quality of feeding and discharging. So how does the feeding and discharging device of the automatic feeding mixer work?

進、出料斗通過支架和副車架的后臺支撐架相連。出料斗及主卸料槽內加有襯板，襯板采用高強度細晶粒合金鋼，其耐磨能力為Q345A(原16Mn)的2.5～～3倍， 大幅度的提高了耐磨性。

The inlet and outlet hoppers are connected with the backstage support frame of the subframe through a bracket. Lining plates are added in the discharge hopper and main discharge chute. The lining plates are made of high-strength fine grain alloy steel, and their wear resistance is 2.5 ~ ~ 3 times that of Q345A (original 16Mn), which greatly improves the wear resistance.

主卸料槽能使混凝土朝所要求的方向卸出，副卸料槽起延長主卸料槽的長度的作用。需副卸料槽接長卸料時，只需將副卸料槽裝在主卸料槽上即可，非常方便。

The main discharge chute can discharge the concrete in the required direction, and the auxiliary discharge chute can extend the length of the main discharge chute. When the auxiliary discharge chute needs to be extended for discharging, it is only necessary to install the auxiliary discharge chute on the main discharge chute, which is very convenient.

鎖緊架裝置在卸料槽不工作時，將主卸料槽鎖定。使用方法：卸料槽不工作時，將其向里一推，便會(huì )自動鎖定，掀下鎖柄，即可將卸料槽拉出。

The locking frame device locks the main discharge chute when the discharge chute is not working. Usage: when the discharge chute is not working, push it inward, it will automatically lock, lift the lock handle, and then pull out the discharge chute.

卸料槽控制桿起回轉支撐卸料槽，及調節卸料槽槽口的上下位移的作用，采用肩扛式伸縮套筒的方式調節主料槽卸料時的傾角，定位準確，聯接可靠，操作方便省力。

The control rod of the discharge chute plays the role of rotating and supporting the discharge chute and adjusting the up and down displacement of the notch of the discharge chute. The shoulder telescopic sleeve is used to adjust the inclination angle of the main chute during discharge, with accurate positioning, reliable connection, convenient and labor-saving operation.

鎖緊桿將轉任意一位置的卸料槽鎖定。使用方法：掀下手柄，即可解除鎖定。

The locking rod will lock the discharge chute turned to any position. Usage: lift down the handle to unlock.

裝料功能：攪拌車在裝料的時候轉速是比較快的，大約每分鐘為6-10轉的樣子，混凝土通過裝料系統從進料口進入攪拌罐，并在螺旋葉片的攪動下，流向攪拌罐的中下部。

Loading function: the speed of the mixer truck is relatively fast when loading, about 6-10 revolutions per minute. The concrete enters the mixing tank from the feeding port through the loading system and flows to the middle and lower parts of the mixing tank under the stirring of the spiral blades.

卸料功能：卸料也是有取力器從發動機取力，再通過液壓泵，減速機等輸送到攪拌罐，帶動罐體轉動，速度一般為3-14轉/分鐘；此時混凝土在螺旋葉片的作用下向卸料口移動，在經過卸料口卸出，此時罐體的轉動方向與進料時的方向相反。

Unloading function: the unloading is also powered by a power take-off from the engine, and then transported to the mixing tank through a hydraulic pump, reducer, etc., to drive the tank to rotate, with a speed of 3-14 RPM generally; At this time, the concrete moves toward the discharge port under the action of the spiral blade and is discharged through the discharge port. At this time, the rotation direction of the tank body is opposite to the direction of feeding.

自動上料攪拌車進出料裝置的工作就是怎樣了，如果您對此有什么疑問的話，就來我們網站http://m.jackpetty.net進行咨詢吧。

What about the work of the feeding and discharging device of the automatic feeding mixer? If you have any questions about this, please come to our website http://m.jackpetty.net Let's consult.