RM新时代官方-首页

自動上料攪拌車是由專用車底盤和上裝兩大部分組成的，今天我們就來看看自動上料攪拌車的上裝主要是有哪些部件組成的。

The automatic feeding mixer is composed of two parts: the chassis and the upper part. Today, we will take a look at the upper part of the automatic feeding mixer.

攪拌罐：攪拌罐可以說是整個上裝的核心部分，它的技術含量高、公差范圍小、精度要求高，它的性能直接影響預拌混凝土的質量。

Mixing tank: it can be said that the mixing tank is the core part of the whole upper deck, with high technical content, small tolerance range and high precision requirements. Its performance directly affects the quality of ready mixed concrete.

攪拌車車架：車架分為前座、后座及副車架，副車架形式為前后貫通式，采用全封閉矩形管結構或者鋼板壓制成槽型，材料為高強度鋼材，具有強度高、穩定性好等優點。

Mixer truck frame: the frame is divided into front seat, rear seat and subframe. The subframe is a front and rear through type, which is made of fully enclosed rectangular tube structure or steel plate pressed into a groove. The material is high-strength steel, which has the advantages of high strength and good stability.

進料系統：出料口為漏斗形狀，在易磨損的地方進行局部加強，因其內部空間大，易于攪拌罐進料口的殘余物，其角度的設計合理，進料速度快，不易發生堵塞及卡死現象。

Feeding system: the discharge port is in the shape of a funnel, which is locally strengthened at the places where it is easy to wear. Because of its large internal space, it is easy to remove the residues at the feed port of the mixing tank. The design of its angle is reasonable, the feeding speed is fast, and it is not easy to block and jam.

出料系統：出料槽能在水平方向180度旋轉，每隔20度就有一個限位裝置，垂直方向用壓縮彈簧式，自由升降，以便使用不同場所的卸料要求。

Discharge system: the discharge chute can rotate 180 degrees in the horizontal direction, and there is a limit device every 20 degrees. The vertical direction uses the compression spring type, which can rise and fall freely, so as to use the discharge requirements of different places.

操縱系統：攪拌車的操縱系統采用定位準確、控制可靠的桿系控制系統，控制點分別在駕駛室內、車尾兩側共三處，駕駛室內的操作桿也可控制攪拌罐的轉向，以確保車輛行駛過程中攪拌罐處于轉動狀態。

Operating system: The operating system of the mixer truck adopts a linkage control system with accurate positioning and reliable control. The control points are located in the cab and at two sides of the rear of the truck. The operating lever in the cab can also control the steering of the mixing tank to ensure that the mixing tank is in a rotating state during vehicle driving.

液壓系統：攪拌車的液壓驅動方式采用手動伺服變量軸向柱塞泵和定量柱塞泵馬達及減速機組成閉式液壓傳動系統，可無級正反轉變速，調節控制方便。

Hydraulic system.

供水系統：攪拌車的供水系統采用氣壓是供水，壓縮氣體有主車儲氣筒經單回路保護閥、氣源開關、減壓閥、單向閥壓力水箱，水箱中的水壓入水管，水的沖洗壓力可調整，軟管和沖洗裝置的搭配可方便車輛的沖洗。

Water supply system: The water supply system of the mixer truck uses air pressure to supply water. The compressed gas is from the main vehicle air reservoir to the pressure water tank through the single circuit protection valve, air source switch, pressure reducing valve, one-way valve. The water pressure in the water tank enters the water pipe. The water flushing pressure can be adjusted. The hose and flushing device can be used to facilitate the vehicle flushing.

自動上料攪拌車的上裝明顯的標志就是攪拌罐，攪拌車的上裝還包括車架、進出料系統、操作系統、液壓系統、供水系統，具體如上述所講解的內容，您對此有什么需求可以隨時來我們網站http://m.jackpetty.net咨詢！

The obvious sign of the automatic loading mixer is the mixing tank. The loading of the mixer also includes the frame, the feeding and discharging system, the operating system, the hydraulic system, and the water supply system. As explained above, you can come to our website at any time if you have any needs http://m.jackpetty.net consulting service