全自動上料攪拌一體車操作時需要注意什么？
概述：全自動上料攪拌一體車是建筑行業中比較重要的一款設備，一款好的設備也有它自己的工作技巧，我們萊州聚峰機械有限公司在跟客戶交接完設備后
全自動上料
攪拌一體車是建筑行業中比較重要的一款設備，一款好的設備也有它自己的工作技巧，我們萊州聚峰機械有限公司在跟客戶交接完設備后都會(huì )接二連三的囑咐設備的正確運行方式，今天我們也在這里跟大家簡單的說一說，全自動上料攪拌一體車這款設備在后期應該如何使用。
Fully automatic feeding and mixing vehicle is an important equipment in the construction industry. A good equipment also has its own working skills. We Laizhou Jufeng Machinery Co., Ltd. will instruct the correct operation mode of the equipment one after another after handing over the equipment with customers. Today, we will also briefly tell you about this equipment How to use it later.
我們在安裝混凝土后要抓緊時間去施工場地，不可以在現場停留時間超過一小時，如果出現特殊情況，我們需要要求現場的負責人去及時處理。全自動上料攪拌一體車的運輸塌落度也不可以小于八厘米。
After concrete installation, we should seize the time to go to the construction site, and can not stay on the site for more than an hour. If there are special circumstances, we need to ask the person in charge of the site to deal with it in time. The transportation slump of the fully automatic feeding and mixing truck should not be less than 8 cm.
在啟動全自動上料攪拌一體車之前，我們要觀察，全自動上料攪拌一體車的手柄要處于停止的位置，發動機發動后，全自動上料攪拌一體車要用低速去滾動大約10分鐘左右，而且要維持液壓油的溫度升高到二十攝氏度以上才可以。
Before starting the full-automatic feeding and mixing vehicle, we should observe that the handle of the full-automatic feeding and mixing vehicle should be at the stop position. After the engine is started, the fully automatic feeding and mixing vehicle needs to roll at a low speed for about 10 minutes, and the temperature of the hydraulic oil should be kept above 20 ℃.
The above is about the automatic feeding mixing truck operation precautions related content, I believe you all know, want to learn more about the relevant content, welcome to click our http://m.jackpetty.net Website.
點擊撥打服務熱線：4008791999
