概述：自動攪拌車在運行期間長期運行時會(huì )自然升高溫度，但如果超過設備本身可承受的溫度，則會(huì )對設備造成一定的損壞。因此，當設備溫度過高時，我
自動攪拌車在運行期間長期運行時會(huì )自然升高溫度，但如果超過設備本身可承受的溫度，則會(huì )對設備造成一定的損壞。因此，當設備溫度過高時，我們需要對其進行相應的維護工作。我們來看看吧。
The temperature of the automatic mixer will rise naturally when it runs for a long time, but if it exceeds the temperature that the equipment can bear, it will cause certain damage to the equipment. Therefore, when the equipment temperature is too high, we need to carry out the corresponding maintenance work. Let's have a look.
1，防止發動機機體過熱：由于環境溫度較高，發動機容易過熱。有必要加強發動機冷卻系統的檢查和維護。這包括檢查水箱，恒溫器，水泵，風機等，并注意及時添加。注意冷卻水。當水溫超過100°C時，停在陰涼處冷卻，讓發動機怠速，并打開引擎蓋以幫助散熱。
1. Prevent engine body from overheating: due to high ambient temperature, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of engine cooling system. This includes checking the water tank, thermostat, water pump, fan, etc., and paying attention to timely adding. Pay attention to the cooling water. When the water temperature exceeds 100 ° C, stop in the shade to cool, let the engine idle, and open the hood to help heat dissipation.
2，防止發動機爆燃：夏季氣溫高，有時超過35°C，而在這樣的季節，對于部分老化部件的汽車，自然爆炸的概率也要高得多。所以要做好預防準備。
2. Prevent engine deflagration: the temperature is high in summer, sometimes exceeding 35 ° C. in such a season, the probability of natural explosion is much higher for vehicles with some aging parts. So be prepared for prevention.
3，防止汽車油漆損壞：汽車油漆經過強烈陽光照射后，會(huì )老化，起皺，而普通美容打蠟可以起到一定的防曬效果，但因為任何車蠟都含有鉍成分，長時間紫外線照射會(huì )使油漆生銹留下一點黑點。汽車蠟本身不能提高硬度和抗紫外線效果，但它會(huì )因高溫而迅速失去。停車時，請注意將車停在陰涼處。
3. Prevent the damage of automobile paint: the automobile paint will be aged and wrinkled after being exposed to strong sunlight, while the ordinary beauty waxing can have a certain sun protection effect, but because any car wax contains bismuth, long-term ultraviolet radiation will make the paint rust and leave a little black spots. Car wax itself cannot improve the hardness and UV resistance, but it will lose rapidly due to high temperature. When parking, please park in the shade.
4，防止汽車輪胎爆裂：高溫時，更容易穿刺，當溫度過高時，輪胎容易變形，抗拉強度降低。作為輪胎本身，氣壓不是標準的，輪胎老化，性能減弱，或者輪胎在行駛過程中被卷成硬質金屬或其他硬物，這將導致汽車突然爆裂。
4. Prevent automobile tire burst: it is easier to puncture at high temperature. When the temperature is too high, the tire is easy to deform and the tensile strength is reduced. As the tire itself, the air pressure is not standard, the tire aging, performance degradation, or the tire is rolled into hard metal or other hard objects during driving, which will cause the car to burst suddenly.
5，防止發動機潤滑不良：當溫度高時，油的粘度降低，抗氧化性變差，導致潤滑不良。因此，請務必檢查油品質量并及時添加或更換。注意及時清潔機油濾清器和散熱器，確保油流暢通，散熱好，盡量避免發動機過載。
5. Prevent the engine from poor lubrication: when the temperature is high, the viscosity of the oil will be reduced, and the oxidation resistance will be poor, resulting in poor lubrication. Therefore, please check the quality of the oil and add or replace it in time. Pay attention to clean the oil filter and radiator in time to ensure smooth oil flow and good heat dissipation, and try to avoid engine overload.
6，防止制動器制動器失效：制動液在高溫環境下更容易蒸發汽化，在制動管內形成空氣阻力，制動蹄也容易燒蝕，導致制動器失效。因此，需要經常檢查和調整制動系統。在長坡期間，應注意停車制動，以確保良好的制動性能。如果發現制動轂很熱，請將其停止并冷卻，但不要倒入冷水以防止制動轂破裂。
6. Prevent brake failure: the brake fluid is easier to evaporate and vaporize in high temperature environment, forming air resistance in the brake pipe, and the brake shoes are easy to be ablated, resulting in brake failure. Therefore, it is necessary to check and adjust the brake system frequently. In the long slope period, attention should be paid to the parking brake to ensure good braking performance. If it is found that the brake hub is very hot, stop it and cool it, but do not pour cold water into it to prevent the brake hub from cracking.
The above is about the automatic feeding concrete mixer truck maintenance matters at high temperature, hope to help you, want to learn more, welcome to click the automatic mixer truck http://m.jackpetty.net Official website.
點擊撥打服務熱線：4008791999
