自動上料攪拌車發動機如何清洗?
概述: 直接將自動上料攪拌車發動機外部清洗劑均勻噴灑于浸濕后,攪拌車發動機及引擎室周邊,待三分鐘后,用纖維毛刷清洗引擎室內所能觸及到的
直接將自動上料攪拌車發動機外部清洗劑均勻噴灑于浸濕后,攪拌車發動機及引擎室周邊,待三分鐘后,用纖維毛刷清洗引擎室內所能觸及到的所有部件。
Directly spray the external cleaning agent on the engine of the automatic feeding mixer evenly after soaking. After three minutes, clean all the components that can be touched in the engine room with a fiber brush.
將自動上料攪拌車發動機外部清洗劑噴灑于引擎表面,操作步驟同上,周而復始,直將發動機外表清洗干凈。沖洗干凈的發動機用半濕性毛巾擦干,并用吸塵吸水風干機將手不易觸及到的地方吸干,然后風干。
Spray the external cleaning agent on the engine surface of the automatic feeding mixer, and the operation steps are the same as above, and repeat until the engine surface is cleaned. Clean the engine, dry it with a semi wet towel, and use a vacuum suction air dryer to dry the hard to reach place, and then air dry.
使用高壓水槍由自動上料攪拌車發動機側面按從上到下的順序?qū)⒁媸覂?nèi)側及發動機外表的附著類污物沖凈。用塑料橡膠保護劑對引擎室內側的塑料橡膠部件進行上光,然后再將金屬部件鍍膜。
Use a high-pressure water gun to clean the attached dirt on the inside and outside of the engine according to the sequence from top to bottom. The plastic rubber parts inside the engine room are polished with plastic rubber protector, and then the metal parts are coated.
The above is about how to clean the engine of the automatic feeding mixer. I hope it will help you. If you want to know more, please click the automatic feeding mixer http://m.jackpetty.net Official website.