RM新时代官方-首页

The production of a concrete mixer needs the right chassis and the right top decoration. The chassis comes from the manufacturer of chassis brand, and then the top decoration is carried out in the refitting plant of the mixer. Today, I will give you the refitting knowledge of concrete mixer.

攪拌車的改裝有必要遵循必定的準則：

First of all, it is necessary to follow certain rules in the modification of mixer

1. 攪拌車改裝部分的結構及改裝部分與車架了解的合理性。

1. The structure of the modified part of the mixer and the rationality of understanding the modified part and the frame.

2. 攪拌車改裝需求在原底盤上進行加工的合理性。

2. The rationality of the modification of the mixer on the original chassis.

3. 及法規限制的項目等等。

3. Safety and regulatory restrictions, etc.

4. 改裝后，混凝土攪拌車整車總質量不得超過允許的總質量，各軸軸載質量不得超過允許的大限度軸載質量。

4. After refitting, the total mass of concrete mixer truck shall not exceed the permitted total mass, and the axle load mass of each axle shall not exceed the permitted maximum axle load mass.

5. 載荷分布應左右根本均勻，偏差不得超過30%。

5. The load distribution should be uniform and the deviation should not exceed 30%.

6. 方位要盡或許低，但有必要留有車輪彈跳高度所需的空間。

6. The position of the center of gravity should be as low as possible, but it is necessary to reserve the space for the wheel bounce height.

7. 改裝后的混凝土攪拌車的外形尺寸不得超過限值，后懸不得超過標準限值。

7. The overall dimension of the modified concrete mixer shall not exceed the limit value, and the rear suspension shall not exceed the standard limit value.
             

8. 改裝后的攪拌車要確保修理、保養的方便性。

8. The refitted mixer should ensure the convenience of repair and maintenance.

9. 改裝不允許隨意改動攪拌車的軸距，關于加長、縮短車架縱梁、改動橫梁的方位等特殊情況，有必要向供底盤部分的技術人員進行咨詢，避免呈現改裝的質量問題。

9. Modification is not allowed to change the wheelbase of the mixer at will. It is necessary to consult the technical personnel of the chassis for special circumstances such as lengthening, shortening the frame longitudinal beam and changing the orientation of the cross beam, so as to avoid the quality problems of modification.

10. 改裝后的混凝土攪拌車有必要滿意我國現行的法規要求。

10. It is necessary for the modified concrete mixer to meet the requirements of current laws and regulations in China.

改裝后的攪拌車有必要符合以下要求：

The modified mixer must meet the following requirements:

1. 改裝好的攪拌車有必要確保其功用和工作性，以及一切運動部件的運動空間。

1. It is necessary to ensure the function and safety of the modified mixer, as well as the movement space of all moving parts.

2. 要確保攪拌車改裝部分由足夠的修理空間，特別是各光滑點、緊固螺栓、蓄電池和制動設備零件的可操作空間。

2. Make sure that there is enough repair space for the modified part of the mixer, especially for the smooth points, fastening bolts, batteries and brake equipment parts.

3. 日常保養的各檢查及光滑點，有必要確保不用任何拆開就可進行。

3. It is necessary to ensure that the inspection and smooth points of daily maintenance can be carried out without any disassembly.

4. 答應對發動機的冷卻系統進行更改，但不能妨礙空氣的吸入和廢氣的排出。

4. It is allowed to change the cooling system of the engine, but it shall not hinder the intake of air and the discharge of exhaust gas.

5. 裝置改裝部分時，總成及各個部件有必要確保通過性，運轉性，可靠性，功用及修理保養的方便性。

5. When the device is refitted, it is necessary for the assembly and various parts to ensure the safety of passage, operation safety, reliability, function and convenience of repair and maintenance.

6. 當改裝部分伸出駕駛室之上時，應確保駕駛室能夠自在的翻轉。

6. When the modified part extends over the cab, the cab shall be able to turn over freely.

7. 改裝后的攪拌車不得影響其行進、制動和轉向功能。

7. The modified mixer shall not affect its travel, braking and steering functions.

看了以上這些是不是覺得混凝土攪拌車的改裝也不是那么容易的？其實這只是其間的一些要求，混凝土攪拌車的改裝還有很多的技術要求呢。如您想要了解更多精彩內容請多多關注我們的網站。

After reading the above, do you think that the modification of concrete mixer is not so easy? In fact, these are just some of the requirements. There are many technical requirements for the modification of concrete mixer truck. If you want to know more wonderful content, please pay more attention to our website.