概述:1 節溫器阻滯:節溫器無法正常開關,通常是機械缺點或冷卻系統填充不完全而構成。更新的恒溫器和原有的溫度系數紛歧樣,構成缺點要素。
1
1.節溫器阻滯:節溫器無法正常開關,通常是機械缺點或冷卻系統填充不完全而構成。更新的恒溫器和原有的溫度系數紛歧樣,構成缺點要素。
1. Thermostat block: the thermostat cannot be opened and closed normally, which is usually caused by mechanical defects or incomplete filling of the cooling system. The updated thermostat is different from the original temperature coefficient, which constitutes a defect element.
2.電扇疑問:電扇馬達不動或電扇離合器缺點,無法正常降溫。
2. Question about the electric fan: the electric fan motor does not move or the electric fan clutch is defective, so it cannot cool down normally.
3.冷卻劑外漏:冷卻系統的管子若有分裂,構成冷卻劑丟掉,散熱不能正常運作;這么的景象只需換條新管就能改善。
3. Coolant leakage: if the pipes of the cooling system are split, the coolant is lost and the heat dissipation cannot operate normally; Such a scene can be improved by changing a new tube.
4.散熱器蓋子:假如散熱器的蓋子壓力紛歧,會構成彈簧松動,蓋口無法緊密閉和。
4. Radiator cover: if the pressure of the radiator cover is different, the spring will be loose and the cover opening cannot be closed tightly.
5.排氣:三元催化器堵塞或管子分裂,構成排氣受阻,致使引擎過熱。
5. Exhaust: the three-way catalyst is blocked or the pipe is split, resulting in blocked exhaust and overheating of the engine.
6.水泵:長期運用的水泵在高度磨損后,零件磨失墜落;僅有的處理辦法便是換新水泵。
6. Water pump: after the long-term use of water pump is highly worn, the parts are worn out and fall; The only solution is to replace the water pump.
小型混凝土攪拌車中,強度是混凝土首要的力學性能,混凝土強度首要取決于混合料間的界面結構。
In the small-scale concrete mixer, the strength is the most important mechanical property of concrete, and the concrete strength mainly depends on the interface structure between mixtures.
電池是小型混凝土攪拌車的首要部件,它的功用是供給起動機用電,在發動機起動或低速作業時,向發動機點火系和其他用電設備供電。在發動機高速作業時,發電機發電滿足,電池可以儲存剩余的電能。悵惘的是,它在通常情況下被大多數人忽略。
Battery is the primary component of small concrete mixer. Its function is to supply power to the starter. When the engine starts or operates at low speed, it will supply power to the engine ignition system and other electrical equipment. When the engine operates at high speed, the generator generates enough power, and the battery can store the remaining electric energy. Sadly, it is usually ignored by most people.
小型混凝土攪拌車由汽車底盤、攪拌筒、傳動系統、供水設備、全功率取力器、攪拌筒前后支架、減速機、液壓傳動系統、進出料系統、操作組織等有些構成;由于技能瓶頸,國產攪拌車罐體容積3m-8m的選用國產四大件,8m?以上容積的選用的四大件大有些為進口部件。攪拌車構成:二類底盤、傳動系、液壓系統、機架、攪拌罐、進出料設備、供水系統、操作系、人梯等有些。
The small concrete mixer truck is composed of automobile chassis, mixing drum, transmission system, water supply equipment, full power power take-off, front and rear supports of mixing drum, reducer, hydraulic transmission system, feeding and discharging system, operation organization, etc; Due to the bottleneck of skills, four domestic large pieces with a tank volume of 3m-8m shall be selected for domestic mixer truck, 8m? The four large parts selected for the above volume are large, some of which are imported parts. Composition of mixer truck: Class II chassis, transmission system, hydraulic system, frame, mixing tank, feeding and discharging equipment, water supply system, operation system, ladder, etc.
其他,小型混凝土攪拌車的前端與減速機聯接安裝在機架前臺上,后端通過滾道由安裝在機架后臺的兩個托輪支撐。
In addition, the front end of the small concrete mixer is connected with the reducer and installed on the front desk of the rack, and the rear end is supported by two supporting wheels installed on the back of the rack through the raceway.
The above is the information sharing provided by the automatic feeding mixer for you today. For more wonderful contents, please pay attention to our website: http://m.jackpetty.net , there will be more content for you.