如何預防夏季自動攪拌車過熱?
概述:萊州聚峰機械廠家為大家講解如何預防夏季自動上料攪拌車過熱?
Laizhou Jufeng machinery manufacturer explains how to prevent o
萊州聚峰機械廠家為大家講解如何預防夏季自動上料攪拌車過熱?
Laizhou Jufeng machinery manufacturer explains how to prevent overheating of automatic feeding mixer in summer?
在夏天使用混凝土自動上料攪拌車軌道時,通常會(huì )造成危險,因為溫度過高。但是,如果溫度超過設備可以承受的溫度,則會(huì )損壞設備本身。
When using automatic concrete loading mixer tracks in summer, it is usually dangerous because the temperature is too high. However, if the temperature exceeds the temperature that the equipment can withstand, the equipment itself will be damaged.
夏季溫度很高,可以超過35°C,以防止發動機爆炸。因此,需要預防工作。
The temperature is very high in summer, which can exceed 35 ° C to prevent engine explosion. Therefore, prevention is needed.
防止發動機過熱。較高的環境溫度使發動機更容易過熱。發動機冷卻系統的檢查和維護需要加強。這包括檢查水箱,恒溫器,水泵,風扇等。注意增加時間。注意冷卻水。如果水溫超過100°C,請在陰涼處停止冷卻,讓發動機空轉,然后打開引擎蓋散熱。
Prevent the engine from overheating. Higher ambient temperatures make the engine more prone to overheating. The inspection and maintenance of engine cooling system need to be strengthened. This includes checking the water tank, thermostat, water pump, fan, etc. Pay attention to increasing time. Pay attention to the cooling water. If the water temperature exceeds 100 ° C, stop cooling in the shade, let the engine idle, and then open the hood to dissipate heat.